HP Designjet 4000 Printer series - Manual (Page 101)

6 How do I handle the ink system?
● “How do I remove an ink cartridge?” on page 99
● “How do I insert an ink cartridge?” on page 104
● “How do I remove a printhead?” on page 106
● “How do I insert a printhead?” on page 110
● “How do I manage printhead monitoring?” on page 113
● “How do I recover (clean) the printheads?” on page 113
● “How do I clean a printhead's electrical connections?” on page 113
● “How do I align the printheads?” on page 119
● “How do I remove a printhead cleaner?” on page 120
● “How do I insert a printhead cleaner?” on page 122
● “How do I check the status of the ink system?” on page 124
● “How do I get ink cartridge statistics?” on page 124
● “How do I get printhead statistics?” on page 125
● “How do I check printer usage statistics?” on page 125
How do I remove an ink cartridge?
There are two types of ink cartridge removal.
●
The ink cartridge is very low and you want to replace it with a full cartridge for
unattended printing (you can use up the remaining ink in the first cartridge at a
more convenient time).
● The ink cartridge is empty or faulty, and you must replace it to continue printing.
Caution 1 Do not try to remove an ink cartridge while printing.
Caution 2 Remove an ink cartridge only if you are ready to insert another one.
Warning Make sure the printer wheels are locked (the brake lever is pressed
down) to prevent the printer from moving.
99
How do
I
handle
the
ink
system?