How do i change the sleep mode setting, How do i turn off the buzzer, How do i change the front panel contrast – HP Designjet 4000 Printer series User Manual
Page 79: How do i change the units of measurement
●
Clear accounting information
●
Update the printer's firmware
Note
If you forget the password, see “The problem is I cannot access the
Embedded Web Server from my browser” on page 221.
How do I request e-mail notification of specific error
conditions?
1.
In the Embedded Web Server, go to the E-mail server page, which you can find in
the Settings Tab, and ensure that the following fields are correctly filled in:
–
SMTP server: the IP address of the outgoing mail server (SMTP) that will
process all e-mail messages from the printer. If the mail server requires
authentication, e-mail notifications will not work.
–
Printer e-mail address: each e-mail message sent by the printer must
include a return address, which does not need to be a real, functional e-mail
address, but it should be unique, so that recipients of the message can
identify the printer that sent it.
2.
Go to the Notification page, which is also in the Settings tab.
3.
Click New to request new notifications (or Edit to edit notifications that have
already been set up). Then fill in the e-mail addresses to which notifications
should be sent, and select the incidents that should result in notification
messages. Initially the most commonly-specified incidents are shown; to see all
the possibilities, click Show all alerts.
How do I change the sleep mode setting?
If the printer is left switched on but unused for a certain period of time, it will go
automatically into sleep mode to save power. To change the time the printer waits
before it goes into sleep mode, go to the front panel and select the
icon, then
Configuration menu > Sleep mode wait time.
How do I turn off the buzzer?
To turn the printer's buzzer on or off, go to the front panel and select the
icon, then
Configuration menu > Buzzer.
How do I change the front panel contrast?
To change the contrast of the front panel display, select the
icon, then
Configuration menu > Display contrast, and choose a value using the Up or Down
key. Press the Select key to set the value you have chosen.
How do I change the units of measurement?
To change the units of measurement displayed in the front panel, select the
icon,
then Configuration menu > Unit selection, and select English or Metric.
77
How
do I
operate the
printer?