HP Designjet 4000 Printer series - Manual (Page 81)

5 How do I handle paper?
● “How do I load a roll onto the spindle?” on page 79
● “How do I load a roll into the printer?” on page 83
● “How do I unload a roll from the printer?” on page 88
● “How do I load a single sheet?” on page 89
● “How do I unload a single sheet?” on page 93
● “How do I select supported paper types?” on page 94
● “How do I view information about the paper?” on page 95
● “How do I download media profiles?” on page 96
● “How do I use non-HP paper?” on page 96
● “How do I cancel the drying time?” on page 96
● “How do I change the drying time?” on page 97
How do I load a roll onto the spindle?
1. Make sure the printer wheels are locked (the brake lever is pressed down) to
prevent the printer from moving.
2. Lower the spindle lever.
3. Remove the right-hand end of the spindle (1) from the printer, then move it to the
right in order to extract the other end (2). Do not insert your fingers into the
spindle supports during the removal process.
79
How
do
I handle
paper?