HP Designjet 4000 Printer series User Manual
Page 89
Advertising
12. Wind the excess paper onto the roll. Use the paper stop to turn the roll in the
direction shown.
13. Lower the window.
14. The front panel again prompts you to wind excess paper onto the roll.
15. The printer will perform a color calibration, if it has not already calibrated the
paper type you are using, and if color calibration is turned on. See “How do I
perform color calibration?” on page 139.
16. The front panel displays the
Ready
message and the printer is ready to print.
87
How
do
I handle
paper?
Advertising