HP Designjet 4000 Printer series - Manual (Page 75)

4 How do I operate the printer?
● “How do I switch the printer on and off?” on page 73
● “How do I restart the printer?” on page 74
● “How do I change the language of the front panel?” on page 74
● “How do I access the Embedded Web Server?” on page 75
● “How do I change the language of the Embedded Web Server?” on page 76
● “How do I password–protect the Embedded Web Server?” on page 76
● “How do I request e-mail notification of specific error conditions?” on page 77
● “How do I change the sleep mode setting?” on page 77
● “How do I turn off the buzzer?” on page 77
● “How do I change the front panel contrast?” on page 77
● “How do I change the units of measurement?” on page 77
● “How do I adjust for altitude?” on page 78
How do I switch the printer on and off?
The normal and recommended way to switch the printer on and off is to use the
Power key on the front panel.
When you switch off the printer this way, the printheads are automatically stored with
the printhead cleaners, which prevents them from drying out.
If you are not planning to use the printer for a long time (for instance, a day or more),
you are recommended to switch it off using the Power key, and then also switch off
the power switch at the rear.
73
How
do I
operate the
printer?