HP Designjet 4000 Printer series - Manual (Page 70)

5. Select IP Printing from the popup menu.
6. Type the printer's IP address (which you noted in step 2) into the Printer Address
field.
7. Select the HP Designjet 4000 PS3 PostScript Printer Description (PPD) file.
8. In the Printer Model field, select HP and then HP Designjet 4000ps.
9. Click the Add button. Close the Printer Setup Utility.
How do I connect my printer to a network (Mac OS 9)?
You can connect your printer to a network under Mac OS 9 using the following
methods:
●
TCP/IP
● AppleTalk
Using TCP/IP
Before you begin, make sure that your printer is switched on and connected to the
network.
To connect your printer using TCP/IP:
1.
Go to the front panel and select the icon, then I/O setup > Fast Ethernet (or
Gigabit Ethernet) > Show configuration.
2. The front panel will display some information, including the printer's IP address.
Make a note of the IP address.
3. Go to your computer and open the Desktop Printer Utility located in the HP
Designjet 4000ps folder on the hard disk.
4. Choose the AdobePS driver and the Printer (LPR) connection. Click OK.
5. Use the first Change button to select the HP Designjet 4000 PS3 PostScript
Printer Description (PPD) file.
6. Use the second Change button to enter the printer's IP address into the Printer
Address field. Click Verify and then OK.
7. Check that your changes appear correctly on the screen, then click Create.
8. Click Save to save your new printer setup on the Desktop.
Using AppleTalk
Note AppleTalk is supported only with the optional Jetdirect print server.
Chapter 3
68
How
do
I set
up
my
printer
software?