How do i unpack the printer – HP Designjet 4000 Printer series User Manual
Page 16
Advertising
How do I unpack the printer?
Before you start unpacking, consider where you are going to put the assembled
printer. You should allow some clear space at the back and at the front of the printer.
The recommended clearances are shown in the illustration below.
When you have identified a suitable location, you can begin unpacking.
1.
Remove the two side lids. Then remove all the upper four plastic handles from
both sides of the box (two each side).
Chapter 2
14
How do
I assemble
the
printer?
Advertising