HP Designjet 4000 Printer series - Manual (Page 223)

The problem is I cannot access the Embedded Web
Server from my browser
If you have not done so already, please read “How do I access the Embedded Web
Server?” on page 75.
●
Have you set a password for the Embedded Web Server, and then forgotten the
password? If so, select the
icon, then Configuration menu > Reset EWS
password.
●
At the printer's front panel, select the icon, then Configuration menu > Allow
EWS. If this option is off, turn it on.
● Check that you have a TCP/IP (network or FireWire) connection to your printer. If
you connect directly to your printer with a USB cable, you cannot use the
Embedded Web Server.
● If you are using a FireWire connection, make sure that your computer's operating
system supports IP over IEEE-1394 (FireWire). For example, Windows XP and
Windows 2003 Server support IP over FireWire, but Windows 2000 does not.
Mac OS X 10.3 also supports IP over FireWire (see “How do I access the
Embedded Web Server?” on page 75). Make sure that your operating system is
configured to use IP over FireWire.
● At the printer's front panel, check that IP is enabled for the type of connection you
are using. Select the
icon, then I/O setup, then the type of connection you are
using, and check that you see IP enabled. If not, you may need to use a different
type of connection.
● If you normally access the Web through a proxy server, try bypassing the proxy
server and accessing the Web server directly. You can do this by modifying your
browser settings.
For instance, if you are using Internet Explorer 6 for Windows, go to Tools >
Internet Options > Connections > LAN Settings, and check the 'Bypass proxy
server for local addresses' box. Alternatively, for more precise control, click the
Advanced button and add the printer's IP address to the list of Exceptions for
which the proxy server is not used.
● Try switching off the printer (with the Power key on the front panel) and then
switching it on again.
The problem is an out-of-memory error
There is no direct relationship between the size of a file in your computer and the
amount of memory needed in the printer to print the file. In fact, because of file
compression and other complicating factors it is often impossible to estimate how
much memory will be needed. So it is possible that a print will fail for lack of memory
even though you may have successfully printed larger files in the past. In this case
you may need to consider adding more memory to your printer.
If you are using the Windows HP-GL/2 driver, you can often solve printer memory
problems by selecting the Services tab, then Troubleshoot software problems, then
Print job as a bitmap (process in computer).
Note If you select this option, the time needed to process the job in your
computer may be considerably longer.
221
The problem
is something
else