HP Tower Uninterruptible Power System - Manual (Page 18)

Installation 18
Installation
System requirements
For a complete list of supported operating systems, web browser requirements, and supported hardware, see
the HP website (
http://www.hp.com/go/rackandpower ).
Hardware and software Suggested minimum requirements
HPPP Administrator
Hardware 500-MHz processor
Disk space 10 MB free disk space
System memory
300 MB of RAM
HPPP Client
Hardware 500-MHz processor
Disk space 10 MB free disk space
System memory 300 MB of RAM
Installation overview
Follow these guidelines when installing HPPP components:
• HPPP Administrator—Install the HPPP Administrator on the server that is connected to the UPS serial port
or USB port.
• HPPP Client—Install the HPPP Client on any computer that is powered by the UPS.
For each component, there are three installation options:
• GUI installation—A series of dialog boxes and prompts guide you through the installation process.
• Non-GUI installation—A series of commands are necessary to complete the installation.
• Silent installation—The installer uses the default install path for the platform and no output displays for
the user.
Silent installation is typically used by system administrators who have many installations that are
configured identically and require minimal user interaction.
During a silent installation, install an HPPP Administrator or Client through the assisted installation
method that is appropriate for the operating system.
The following table summarizes the available installation options for each operating system.
Operating
system
GUI
installation
Non-GUI
installation
Silent
installation
Local/remote
installation
Windows Available Available Available -
Linux - Available Available -
HP-UX - Available Available Available