Installing hppp on windows operating systems – HP Tower Uninterruptible Power System User Manual
Page 19
Installation 19
Installing HPPP on Windows operating systems
HPPP can be installed using either a graphical installer or a silent installation on any supported Windows
operating system. To ensure that your system meets the minimum requirements, see "System requirements (on
)."
Installing HPPP using the GUI installer on Windows systems
NOTE:
Before installing the software, be sure that the serial or USB cable connecting the UPS to
the server is properly installed.
To install HPPP using the GUI installer:
1.
If the server is connected to the UPS through the USB port, verify that the UPS is detected by the
operating system, and then click OK.
If the software has been downloaded from the HP website
,
follow the instructions to unpack the files, and then locate and run the HPPP executable file.
The Welcome screen appears.