HP Tower Uninterruptible Power System User Manual
Page 37
Installation 37
Installing HPPP remotely using the Generic Package method
NOTE:
Before installing the software, be sure that the serial cable connecting the UPS to the
server is properly installed.
To install HPPP remotely using the Generic Package method:
1.
Find the server on the network, and then log in as a super user.
2.
Locate the HPPP package, and then from the command line execute the following command:
./hppp-hp-ux-x_y_z-ia64 –install
3.
Verify that the device communication is connected, and then enter Y to proceed with the installation.
4.
Press Enter to use the default installation path or enter the new installation path, and then press Enter.
Enter Y to confirm the install directory.
5.
After the installation is complete, launch a supported browser. The browser window appears.
6.
In the URL field, enter:
http://<ipaddress>:4679 (for a standard connection)
-or-
https://<ipaddress>:4680 (for a secure connection)