HP Tower Uninterruptible Power System - Manual (Page 54)

Configuration and operation 54
Event Actions screen
Click Event Actions in the menu tree to display the Event Actions screen. This screen allows an administrator
to configure the way users are notified when UPS and application events occur.
To add an event action:
1. Click Create new action. The Create new action screen appears. Fields marked with an asterisk must be
completed.
2. Select or clear the Action enabled checkbox to enable or disable the action.
3. Enter a name for the action in the Action name field.
4. Filter the events that will trigger the action by selecting the checkboxes for the appropriate event
severities. If you configure the action to only filter critical events, notification of normal events associated
with the resolution of the critical events will not be sent.
5. Filter the events that will trigger the action by adding categories to the Event categories field: