HP Tower Uninterruptible Power System User Manual
Page 28
Installation 28
If your system does not derive from RedHat (using .rpm), you can install HPPP using the Generic Package.
To install HPPP from a command line:
1.
Execute the following command from where the generic installer is located (as root):
$ hppp-linux-x_yz-i386 -install
2.
Verify that the device communication is connected, and then enter Y to proceed with the installation.
3.
Press Enter to use the default installation path or enter the new installation path, and then press Enter.
4.
Enter Y to confirm the install directory.
5.
After the installation is complete, launch a supported browser. The browser window appears.
6.
In the URL field, enter:
http://<ipaddress>:4679 (for a standard connection)
-or-
https://<ipaddress>:4680 (for a secure connection)