Installing hppp remotely using the sam method – HP Tower Uninterruptible Power System User Manual
Page 39
Installation 39
Installing HPPP remotely using the SAM method
NOTE:
Before installing the software, be sure that the serial cable connecting the UPS to the
server is properly installed.
To install HPPP remotely using the SAM method:
1.
From a remote machine, enter sam at the command line prompt.
2.
Click Software Management.
3.
Click Install Software to Local Host.
4.
Change the Source Depot Path to a fully qualified path and depot name.
5.
Select the HP Power Protector you are about to install.
6.
Select Actions>Install from the top menu, and click OK and Done.
7.
Click OK to analyze the depot file.
8.
Click OK to install the depot file.
9.
Click Done to complete the installation and continue with the configuration process.
10.
After the installation is complete, launch a supported browser. The browser window appears.
11.
In the URL field, enter:
http://<ipaddress>:4679 (for a standard connection)
-or-
https://<ipaddress>:4680 (for a secure connection)