Installing hppp locally using the sam method – HP Tower Uninterruptible Power System User Manual
Page 35
Installation 35
Installing HPPP locally using the SAM method
NOTE:
Before installing the software, be sure that the serial cable connecting the UPS to the
server is properly installed.
To install HPPP using the SAM method:
1.
From the SAM application, double-click Software Management.
2.
Click Install Software to Local Host.
3.
Change the Source Depot Path to a fully qualified path and depot name.
4.
Select the HP Power Protector you are about to install.
5.
Click Actions>Install from the top menu.
6.
Click OK to analyze the depot file.
7.
Click OK to install the depot file.
8.
Click Done to complete the installation and continue with the configuration process.
9.
After the installation is complete, launch a supported browser. The browser window appears.
10.
In the URL field, enter:
http://<ipaddress>:4679 (for a standard connection)
-or-
https://<ipaddress>:4680 (for a secure connection)