HP Tower Uninterruptible Power System - Manual (Page 41)

Installation 41
Installing HPPP using the silent installation method on HP-UX
systems
NOTE: Before installing the software, be sure that the serial cable connecting the UPS to the
server is properly installed.
During a silent installation, install an HPPP Administrator or Client through the assisted installation method
that is appropriate for the operating system.
To install HPPP using the silent installation method:
1. Locate the generic HPPP package and from the command line, execute the following command:
./hppp-hp-ux-x_y_z-ia64 –install –silent
2. After the installation is complete, launch a supported browser. The browser window appears.
3. In the URL field, enter:
http://<ipaddress>:4679 (for a standard connection)
-or-
https://<ipaddress>:4680 (for a secure connection)