HP Tower Uninterruptible Power System - Manual (Page 82)

Configuration and operation 82
7. Click Yes to remove the node.
Reconfiguring the HPPP Client power source
To reconfigure the HPPP Client(s) power source, perform these steps for all HPPP Clients that are connected
to the HPPP Administrator:
1. Open the HPPP Client web interface, and then select Settings>Device Discovery.
2. Select a temporary power source from the Node List, and then click Configure power source.
The Change Power Source screen appears.
3. Click Yes to replace the current power source.
4. Select the old power source from the Node List, and then click Remove node.