HP Tower Uninterruptible Power System - Manual (Page 75)

Configuration and operation 75
Up to six types of data can be plotted on the graph. To select the data you want to graph:
1. Click the icon. The Graph Settings screen appears.
2. Select up to six check boxes that correspond to the data you want to graph.
3. Select the amount of time the graph should reflect in the Time Scale pull-down menu. For example, if you
select 12 hours, the graph shows 12 hours worth of collected data.
4. Click Save. The selected time scale displays at the top of the graph. The date and time of the oldest
plotted data values displays in the bottom-left corner. The date and time of the most recent plotted data
values displays in the bottom-right corner.
5. Click the date and time values in the bottom left and right corners to shift the displayed time windows
back or forward.
Power Scope panel
This panel displays the UPS electrical topology (Online UPS, Offline UPS, or Line Interactive UPS) and an
animated graphical representation of the UPS operating mode, which shows the main UPS components and
the electrical flow powering the load.
Hover your mouse over a diagram element to display UPS data details. UPS data is available for Normal
mode, Battery mode, and Bypass mode. The available UPS data depends on the UPS range.