HP LaserJet P3005 Printer series - Manual (Page 112)

Clean the device
During the printing process, paper, toner, and dust particles can accumulate inside the device. Over
time, this buildup can cause print-quality problems, such as toner specks or smearing (see
Solve print-
quality problems ).
Clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the device.
Clean the paper path
1. Press Menu .
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight PRINT QUALITY, and then press .
NOTE If your device has an automatic duplexer, go to step 7.
4. Press to highlight CREATE CLEANING PAGE, and then press .
5. Remove all paper from tray 1.
6. Remove the cleaning page and load it face-down in tray 1.
NOTE If you are not in the menus, navigate to PRINT QUALITY by using the previous
instructions.
7. At the device control panel, press to highlight PROCESS CLEANING PAGE, and then
press .
100 Chapter 6 Manage and maintain the device ENWW