Parallel configuration – HP LaserJet P3005 Printer series User Manual
Page 54
Parallel configuration
NOTE
The information in this section applies only to models HP LaserJet P3005 and
HP LaserJet P3005d.
A parallel connection is made by connecting the printer to the computer using a bidirectional parallel
cable (IEEE-1284 compliant) with a connector plugged into the printer parallel port. The cable can be a
maximum of 10 meters (30 feet) long.
When used to describe a parallel interface, the term bidirectional indicates that the printer is able to both
receive data from the computer and send data to the computer through the parallel port. While the
parallel interface provides backwards compatibility, a USB or network connection is recommended to
optimize performance.
2
1
1
Parallel port
2
Parallel connector
42
Chapter 3 Input/output (I/O) configuration
ENWW