HP LaserJet P3005 Printer series - Manual (Page 78)

Control print jobs
In Windows, three settings affect how the printer driver pulls media when you send a print job. The
Source, Type, and Size settings appear in the Page Setup, Print, or Print Properties dialog boxes in
most software programs. If you do not change these settings, the device automatically uses the default
device settings to select a tray.
CAUTION Make device setup changes through the software program or the printer driver
whenever possible, because changes that you make at the control panel become default settings
for subsequent print jobs. Settings selected in the software or the printer driver override control-
panel settings.
Source
Print by Source to specify a tray from which the device will pull media. The device tries to print from this
tray, no matter what type or size is loaded in it. If you select a tray that is configured for a type or size
that does not match your print job, the job does not proceed until you load the tray with the correct type
or size. If you load the tray correctly, the device begins printing. If you press , you can select another
tray.
NOTE If you have difficulties printing by Source, see Priority for print settings .
Type and Size
Print by Type or Size when you want to pull media from the first tray that is loaded with the type or size
that you select. Selecting media by type rather than source is similar to locking out trays and helps
protect special media from accidental use. For example, if a tray is configured for letterhead, and you
specify that the driver print on plain paper, the device will not pull media from that tray, but will pull paper
from a tray that has plain paper loaded and is configured for plain paper.
NOTE Selecting the Any setting negates the tray lock-out function.
Selecting media by type and size results in significantly better print quality for heavy paper, glossy paper,
and overhead transparencies. Using the wrong setting can result in unsatisfactory print quality. Always
print by Type for special print media, such as labels or transparencies. Always print by Size for
envelopes.
● If you want to print by Type or Size and the trays have not been configured for a certain type or
size, load the media into tray 1. Then, in the printer driver, select the Type or Size in the Page
Setup, Print, or Print Properties dialog box.
● If you often print on a certain type or size of media, the device administrator (for a network device)
or you (for a local device) can configure a tray for that type or size. Then, when you select that type
or size as you print a job, the device pulls from the tray configured for that type or size.
● When you close tray 2 or optional tray 3, a message might appear prompting you to select a
Type or Size for the tray. If the tray is already configured correctly, press to return to the
Ready state.
66 Chapter 4 Media and trays ENWW