HP LaserJet P3005 Printer series - Manual (Page 80)

Select output bins
The device has two output bins into which it places finished print jobs:
● Top (face-down) output bin: This it the default output bin at the top of the device. Print jobs exit the
device face-down into this bin.
● Rear (face-up) output bin: Print jobs exit the device face-up into this bin at the rear of the device.
NOTE You cannot use automatic duplex printing when printing to the rear output bin.
Print to the top output bin
1. Make sure that the rear output bin is closed. If the rear output bin is open, the device will deliver
the print job to that bin.
2. If you are printing on long media, open the top output bin support.
3. From your computer, send the print job to the device.
68 Chapter 4 Media and trays ENWW