Paper handling menu – HP LaserJet P3005 Printer series User Manual
Page 33
Paper Handling menu
If paper-handling settings are correctly configured at the device control panel, you can print by selecting
the type and size of media in the program or the printer driver. For more information about configuring
for media types and sizes, see
. For more information about supported media types
and sizes, see
and
.
Some items on this menu (such as duplex and manual feed) are available in the program or the printer
driver (if the appropriate driver is installed). Program and device-driver settings override control-panel
settings. For more information, see
Select the correct printer driver
Item
Values
Explanation
TRAY 1 SIZE
List of available media sizes
for tray 1
Use this item to set the value to correspond with the media size that is
currently loaded in tray 1. See
for a list of
available sizes. The default setting is ANY SIZE.
ANY SIZE: If both the type and size for tray 1 are set to ANY, the device
will pull media from tray 1 first if media is loaded in the tray.
A size other than ANY SIZE: The device does not pull from this tray
unless the type or size of the print job matches the type and size that
is loaded in this tray.
TRAY 1 TYPE
List of available media types
for tray 1
Use this item to set the value to correspond with the type of media that
is currently loaded in tray 1. See
for a list of
available types. The default setting is ANY TYPE.
ANY TYPE: If both the type and size for tray 1 are set to ANY, the
device will pull media from tray 1 first if the media is loaded in the tray.
A type other than ANY TYPE: The device does not pull from this tray.
TRAY [N] SIZE
List of available media sizes
for tray 2 or optional tray 3
The tray automatically detects the media size based on the media-size
wheel setting in the tray. The default setting is either LTR (letter) for
110 V engines or A4 for 220 V engines.
TRAY [N] TYPE
List of available media types
for tray 2 or optional tray 3
Sets the value to correspond with the media type that is currently
loaded in tray 2 or optional tray 3. The default setting is ANY TYPE.
TRAY [N] CUSTOM
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
This item appears only if a tray is set to a custom size.
UNIT OF MEASURE: Use this option to select the unit of measure
(INCHES or MILLIMETERS) to use when you set custom paper sizes
for the specified tray.
X DIMENSION: Use this item to set the measurement of the width of
the paper (measurement from side to side in the tray). The options
are 3.0 to 8.50 INCHES or 76 to 216 MM.
Y DIMENSION: Use this item to set the measurement of the length of
the paper (measurement from front to back in the tray). The options
are 5.0 to 14.0 INCHES or 127 to 356 MM.
After the Y DIMENSION value is selected, a summary screen appears.
This screen contains feedback that summarizes all of the information
that was specified on the previous three screens, such as TRAY 1
SIZE= 8 x 14 INCHES, Setting saved.
ENWW
Paper Handling menu
21