HP Library and Tape Tools - Manual (Page 63)

specified and instname is not
specified, the L&TT runtime files will be
created in the dirpath directory.
Otherwise, if dirpath is specified, the
L&TT runtime files will be created in
<dirpath>/logs_<instance
name>
hp_ltt -f scan Example
This command produces the following output in a file named saved_scan.txt
in the current folder:
2/0.4.0:HP:Ultrium 3-SCSI:G54D
From this output, the device hardware path is:
2/0.4.0
For each device L&TT finds during the scan there will be a corresponding entry
in this file.
Listing supported tests (CLF)
Run this command to see a list of tests supported for a device. The list is
displayed on the terminal.
Description
hp_ltt -f listtest p=<device path> Syntax
Enter the device path. The format for
the device path is specific to the p Parameters
operating system. To determine the
format for your operating system and
device, scan the bus. For more
information, see
“Scanning the bus ”
(page 62) . The output of the scan is
written to the saved_scan.txt file
in the L&TT root directory. The output is
in the proper format for use in this
command. This parameter is required.
hp_ltt -f listtest p=2.3.0[2-4/0/4/1/0.3.0]
Results in the following:
Example
Command line functions 63