Lto encryption test, Device configuration test, Lto encryption test device configuration test – HP Library and Tape Tools User Manual

Page 88

Advertising
background image

Table 16 Data Compression test details (continued)

Data Compression test

Details/Other test

NOTE:

The data compression test will overwrite all data on the media. For instructions

on how to perform this test, see

“Running tests and device-specific utilities” (page 29)

or

“Running the tests (CSI)” (page 50)

.

Run this test when you want to verify that data compression is working properly.

When to run

< 10 minutes

Duration

Test will overwrite all data on the media.

Other notes

All tape products (drive and automation) supported by L&TT.

Available for

LTO Encryption test

Table 17 LTO Encryption test details

LTO Encryption test

Details/Other test

This test checks that the encryption capabilities of the LTO-4 or LTO-5 drive is working
correctly. Data is written and read using different combinations of encryption mode,

Description

decryption mode, and using both invalid and valid keys, checking for the correct
response from the drive in each case. The tape is checked at the beginning of the test
to insure that it will correctly support encryption and may therefore be used as a test
tape.

NOTE:

This test will overwrite all data on the media. For instructions on how to

perform this test, see

“Running tests and device-specific utilities” (page 29)

or

“Running

the tests (CSI)” (page 50)

.

Run this test if you want to insure that encryption is working correctly for the LTO-4 or
LTO-5 drive.

When to run

2–3 minutes

Duration

This test will overwrite all data on the media.

Other notes

LTO-4 and LTO-5 tape drives, both standalone and within libraries.

Available for

Device Configuration test

Table 18 Device Configuration test details

Device Configuration test

Details/Other test

This utility lets you configure the drive to enable or disable data compression and to
prevent or allow media removal.

Description

NOTE:

For instructions on how to perform this test, see

“Running tests and

device-specific utilities” (page 29)

or

“Running the tests (CSI)” (page 50)

.

Run this utility when you want to configure the drive to enable/disable data compression
and to prevent/allow media removal.

When to run

< 1 minute

Duration

88

Tests

Advertising