HP EX475 MediaSmart Server - Manual (Page 84)

Using the Server Version Update 1.1.1 6-6
Important: Do not remove the bottom drive. This drive contains the
Windows Home Server operating system.
Important: There are two parts to adding an internal drive: add the drive
to an expansion bay and then initialize the drive so it becomes part of the
total server storage.
To add a SATA drive to an expansion bay
1 Determine which expansion bay to use:
ƒ
The light-bar for an empty expansion bay is off.
ƒ
Add the new hard drive to the lowest available expansion bay.
2 Open the door on the front of the server.
Figure 23: Opening the door
3 On the lowest empty hard-drive tray, press down the lever to unlock the
handle.
Figure 24: Unlocking the hard-drive tray
4 Lift the handle all the way up.