HP EX475 MediaSmart Server User Manual
Page 98
Using the Server
Version Update 1.1.1
6-20
Re-installing the new system drive
This topic provides information about how to install the system drive.
To re-install the new system drive
1
Insert the new system drive into the left side of the hard-drive tray, making
sure that the pins go into the hard drive’s mounting holes.
Figure 53: Putting the new system drive in the hard-drive tray—left side
2
Flex the front of the right side-rail and insert the pin into the hard drive’s
mounting hole, and then flex the back of the right side-rail and insert the
pin into the other mounting hole.
Figure 54: Putting the new system drive in the hard-drive tray—right side
3
With the handle up, slide the hard-drive tray and drive into the system
bay.
Note: Don’t push on the handle; the tray won’t slide in.