HP Parallel Uninterruptible Power System - Manual (Page 68)

UPS operations 68
NOTE: Menu functions related to parallel systems appear only on paralleled UPSs.
Main menu Submenu Display information or menu function
UPS Status System Normal | High Efficiency Power: % /
Battery Resting | Battery Floating UPS in Parallel
mode / Parallel Unit Number x / Units on Bus
Bar / Units on Load
Event Log Displays up to 100 events and alarms
Measurements Parallel system kW (by unit) / kW (Parallel total)
Output Voltage L-N and L-L / Current / Frequency /
Power kW / Power kVA / Power pf
Battery Voltage / Current / Runtime
Input Voltage L-N and L-L / Current / Frequency
Load Receptacle Voltage / Current / Power kW / Power kVA /
Frequency
Control Go to Bypass mode Transfers the UPS system to internal Auto-Bypass
mode
When this command is active, the option
changes to Go to Normal mode.
Start Battery Test Schedules a battery test. The battery test might
not start immediately.
Display Test Four different selectable tests for the front panel
functions:
• The LEDs cycle through
• The alarm sounds
• The backlight turns off and on
• The pixels scroll through to test the LCD
Settings User Settings For more information, see "Changing user
settings (on page
68 )."
Service Settings Not available
Identification UPS Type / Part Number / Serial Number /
Firmware / Display / System / Parallel Card
Turn UPS On/Off On and Off Option UPS On / UPS Off / System On / System Off
Changing user settings
Description Available settings Default setting
Set Date and Time Set Year, Month, Day
Date: mm/dd/yyy 01/01/2003
Set Hours, Minutes 00:00
Time is a 24-hour clock
Display Contrast Adjust contrast with up/down arrow
buttons
Moderate
Change Language Set Language English