Ag Leader GPS 5200 User Guide - Manual (Page 10)

2 Overview
8 GPS 5200 Receiver User Guide
Standard features of the GPS 5200 receiver
A standard GPS 5200 receiver provides the following features:
• 12 GPS (C/A-code) tracking channels, code carrier channels
• Horizontal RTK positioning accuracy 2.5 cm (0.98 in) + 2 ppm,
2 sigma; vertical RTK positioning accuracy 3.7 cm (1.46 in)
+ 2 ppm, 2 sigma
• Submeter differential accuracy (RMS), assuming at least five
satellites and a PDOP of less than four
• Combined GPS/DGPS receiver and antenna
• System level cable
• AgRemote
utility with four-button keypad to configure and view
system properties. You can download this utility from the Ag
Leader website at
www.agleader.com .
• LED status indicator
• The receiver outputs a 1 PPS (pulse per second) strobe signal on
both ports. This signal enables an external instrument to
synchronize its internal time with a time derived from the very
accurate GPS system time.
• Radar output
• WAAS differential correction compatibility
• AgGPS
®
170 Field Computer compatibility
• EVEREST ™ multipath rejection technology
• OmniSTAR VBS, XP, and HP positioning compatibility
• Two ports that support both CAN 2.0B and RS-232:
CAN
– J1939 and NMEA 2000 messages
Note – The GPS 5200 receiver is ISO 11783 compliant. It supports some
ISO 11783 messages.
GPS5200_1A_UserGuide_ENG.book Page 8 Friday, December 19, 2008 12:57 PM