Ag Leader GPS 5200 User Guide - Manual (Page 34)

4 Configuring the Receiver
32 GPS 5200 Receiver User Guide
AgRemote Home screen
The following figure shows the AgRemote Home screen when WAAS
corrections are being received:
For more information about these fields and how they change as you
change GPS mode, refer to the document called AgRemote Software on
the Trimble website (
www.trimble.com ) or contact your local Reseller.
Configuring Differential GPS
For the receiver to output GPS position coordinates of submeter
accuracy, you must first select a differential signal from one of the
following sources:
• WAAS/EGNOS – free service, limited availability
The Wide Area Augmentation System (WAAS) augments GPS
with additional signals for increasing the reliability, integrity,
accuracy, and availability of GPS in the United States. The
European Geostationary Navigation Overlay System (EGNOS) is
the European equivalent of WAAS.
D/3D í07 DOP03
WAAS 122 ÷ø04
Correction type
DGPS satellite name or ID
Signal-to-Noise ratio
of DGPS satellite
Current PDOP value Position type
Number of GPS satellites being tracked
GPS indicators
Correction
indicators
GPS5200_1A_UserGuide_ENG.book Page 32 Friday, December 19, 2008 12:57 PM