Ag Leader GPS 5200 User Guide - Manual (Page 36)

4 Configuring the Receiver
34 GPS 5200 Receiver User Guide
6. Obtain an OmniSTAR licence from OmniSTAR. All licenses are
activated over the air. Contact OmniSTAR on
1-888-883-8476 (USA or Canada) and provide the following
details:
– your billing information
– serial number
– satellite beam name
OmniSTAR will activate the receiver. Activation can take
5–30 minutes.
WAAS/EGNOS
WAAS is a free satellite-based DGPS service that is available only in
North America; EGNOS is a free satellite-based DGPS service that is
available only in Europe.
To use the WAAS/EGNOS DGPS signal, you must first configure the
receiver.
1. Connect the GPS 5200 receiver to the computer. Turn on the
receiver and start the AgRemote utility.
2. In AgRemote, select Configuration / DGPS Config.
3. Set the Source Select field to WAAS.
4. Press  then  to complete the procedure.
GPS5200_1A_UserGuide_ENG.book Page 34 Friday, December 19, 2008 12:57 PM