Ag Leader GPS 5200 User Guide - Manual (Page 46)

A Specifications
52 GPS 5200 Receiver User Guide
L-band satellite differential correction receiver
The following table lists the characteristics of the L-band satellite
differential correction receiver with OmniSTAR support.
Receiver default settings
The following table lists the receiver default settings.
Satellite differential
compatibility OmniSTAR, WAAS, and EGNOS
NMEA messages GGA 1 1
1
, GLL, GSA1, GST, GSV, GST, MSS, PTNLDG, PTNL PJK,
PTNL PJT, PTNL VGK, PTNL VHD, PTNLEV, PTNLID, PTNLSM, RMC1,
VGK, VTG1, XTE, ZDA
1
By default, the receiver is configured to output GCA, GSA, RMC, and VTG messages at a 1 Hz (1
position per second) update rate.
Item Description
Bit error rate 10
-5
for Eb/N of >5.5 dB
Acquisition and reacquisition time <5 seconds, typical
Frequency band 1525–1559 MHz
Channel spacing 0.5 kHz
Item Description
DGPS source WAAS/EGNOS
Dynamics Land
Minimum elevation 8°
AMU mask 3
PDOP mask 13
PDOP 2D/3D switch 11
DGPS mode Auto On/Off
DGPS correction age limit 250 seconds
Pos fix rate 1 Hz
Item Description
GPS5200_1A_UserGuide_ENG.book Page 52 Friday, December 19, 2008 12:57 PM