Innovate Motorsports LM-2 - Manual (Page 13)

Document # 31-0008 LM2_Manual_1.3.doc 13
2.3 Calibration Schedule
Normally aspirated (daily driver)
- Calibrate before installation of new sensor
- Calibrate new sensor again after 3 month of use
- Thereafter calibrate once a year or every 20,000 miles, whichever comes first
Turbo Application, daily driver (tuned rich)
- Calibrate before installation of new sensor
- Calibrate new sensor again after 3 month of use
- Thereafter calibrate twice a year or every 10,000 miles, whichever comes first
Race Application
- Calibrate before first installation of new sensor
- Calibrate once per race weekend
- For added sensor life we also recommend our optional double length bung (part
number 3764
Dyno use:
- Calibrate a new sensor
- Calibrate every 2-3 days, depending on usage