Innovate Motorsports LM-2 - Manual (Page 20)

Document # 31-0008 LM2_Manual_1.3.doc 20
4.3 Selecting Channels with the LM Programmer software
1. Connect the LM-2 to your computer with the provided USB cable.
2. Power up the LM-2.
3. The LM Programmer application can be launched from Start->Programs-
>LogWorks3->LM Programmer from the Windows task bar. A small dialog box
will appear indicating that the program is looking for connected Innovate Devices,
then the main dialog should appear.
4. The Inputs tab allows you to set the number of MTS channels to generate.
5. Click the Inputs tab. Only the number of channels selected on the
Protocol/Channels page can be edited. The available values for logging on the
connected ECU are listed in the drop list for each Input. Some vehicles will
support larger lists than others.
6. Hit the ‘Program’ button to send the configuration.
Also, it cannot be stressed enough that different ECUs will have dramatically
different response speeds. Below are two extreme examples.