Innovate Motorsports LM-2 - Manual (Page 8)

Document # 31-0008 LM2_Manual_1.3.doc 8
1.4 Recording
To start a record session press the Record button. The LM-2’s display will then inverse
and the status bar will display an upper case ‘R’ and a counter on the lower left hand
corner of the screen. To stop the record session press the Record button a second time.
Note: Loss of power while the LM-2 is recording will lose all data from the current
session being recorded.
When recording is first activated, a file is created. The naming convention is:
mmddyyXX.d32
These are the month, day, and year that the file is created. The XX is to accommodate
multiple files on the same day (counting begins at “00”).
Once a file exists, sessions are appended to it for each additional recording. The
exceptions to this are:
1. The MTS channel count/type has changed
2. The user requests a new log file by pressing and holding “Record” (or holding the
record button on an external XD-16.)
The first instance will occur if devices are added or removed the MTS serial chain , or if
channels are enabled/disabled on the LM-2.
When a new file is created, it will be given the day’s date and a unique counter:
07010800.d32
07010801.d32
Etc
Note: When the LM-2 is recording the display will inverse. In the status bar, an upper
case ‘R’ and a counter will display on the lower left
1.5 Playback
1. Press and hold the Mode button to go into the Configuration Menu Screen.
2. Select Playback log and press the Enter button.
3. A list of available logs present on the memory card will be displayed. Make your
selection and press the Enter button.
Note: Depending on the size of the log the next screen some time to appear.
4. A list of available sessions will be displayed. Make your selection and press the
Enter button.
5. The selected session will now start playing. The status bar will display an upper
case ‘P’ and a counter on the lower left hand corner of the screen.