JKS OGS115 - Manual (Page 2)

JKSOGS115 JKS Mini Skid Installation 2 Page
 Once positioned correctly, fillet weld “wings” of
MiniSkid to suspension arm bracket.
 Hammer “tab” of MiniSkid towards axle tube until
gap measures 1/8” or less.
 Fillet weld “tab” of MiniSkid to axle tube.
IMPORTANT: Avoid overheating the axle tube by
allowing the surface to cool off regularly.
 Once all welding is complete, spray paint any bare
metal on MiniSkids, suspension arm brackets, and
axle tube to prevent corrosion. All exposed metal
must be completely covered.
‰ 3. REINSTALL SUSPENSION ARMS
 Reinstall lower front suspension arm to axle
bracket using the original mounting hardware.
HINT: It will be necessary to unbolt chassis end
of suspension arm in order to insert axle end into
“pocket” formed by MiniSkid.
 Using a torque wrench, tighten the suspension
arm mounting hardware to the factory torque
specifications for your vehicle.
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 10/31/2013