Maintenance – JKS 6125 User Manual
Page 3
JKS6125
JKS Adjustable Control Arm Installation
Page 3
5. POST-INSTALLATION INSTRUCTIONS
Adjustable Control Arms are supplied pre-lubri-
cated, although it will be necessary to add more
grease after they have been adjusted and installed
on the vehicle. Refer to Maintenance section for
specific lubrication instructions.
Maintenance
Adjustable Control Arms should be greased regularly as
part of vehicle maintenance schedule. Lubricate using
moisture resistant marine style grease and a hand-pump
grease gun. DO NOT use a pneumatic grease gun. Add
grease slowly until resistance is felt. The internal spring-
loaded seal can be damaged by forcing too much grease
into Control Arms.
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 10/11/2013