JKS 4100 - Manual (Page 4)

JKS4100 JKS Quicker Disconnect Installation 4 Page
‰ 8. LUBRICATE QUICKER DISCONNECTS
 Lubricate all Grease Zerk fittings (E) on the Quick-
er Disconnects immediately after installation using
common wheel bearing grease or equivalent.
Troubleshooting
If swaybar does not rotate freely, remove from vehicle,
clean and apply rubber lubricant to chassis-mounted bush-
ings, and reinstall.
Maintenance
It is important to lubricate Quicker Disconnects frequently
for the first three (3) months after installation to evacuate
contaminants that may build up during break-in period.
After break-in period, Quicker Disconnects should be lubri-
cated regularly as part of vehicle maintenance schedule.
Regular cleaning with pressurized water is recommended
to maximize ease of operation and reliability. Always lubri-
cate afterwards to evacuate any moisture.
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 10/11/2013