JKS 2942 User Manual
Page 3
JKS2942
JKS Adjustable End Links Installation
Page 3
Using an appropriate cutting tool (such as a die
grinder with cutting wheel, or metal cutting saw),
carefully and squarely cut each end of the Con-
necting Rod (A) where previously marked.
Now completely unthread both 1/2” Jam Nuts (B)
from Connecting Rod (A) and re-install.
HINT: This
will help to repair any thread damage that may
have occurred during the cutting process.
4. SET FINAL LENGTH OF ADJUSTABLE
SWAYBAR LINKS
Apply a drop of medium strength thread locking
compound to the tip of threads at each end of
Connecting Rod (A).
Completely thread a Bushing Eyelet (C) on to each
end of Connecting Rod.
5. INSTALL SWAYBAR LINKS
Apply a thin layer of wheel bearing grease to inner
surface and sides of Poly Bushings (D).
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 9/30/2013