JKS OGS126 User Manual

Installation instructions, Welcome, Important

Advertising
background image

JKSOGS125 - JKSOGS126

JKS Adjustable Trackbar Installation

Page 1

INSTALLATION

INSTRUCTIONS

Product: Adjustable Trackbar
Part Number: JKSOGS125 - JKSOGS126

Welcome

CONGRATULATIONS on purchasing a new Adjust-

able Trackbar from JKS Manufacturing. We are com-

mitted to providing you with the best products avail-

able and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-

ly, and save them for future reference, as they contain

important installation and maintenance information.

Important

NOT COMPATIBLE WITH right hand drive

vehicles.
CHECK TORQUE SPECIFICATIONS regularly.

Tools Required



Metric/Standard Socket Wrench Set



Torque Wrench



Tie Rod End Remover *



Tape Measure



1-1/2” Open-End Wrench



9/16” Drill Bit



Flat Metal File *



Heavy Duty Ratchet Strap *



Anti-Seize Lubricant



Grease Gun with Zerk Fitting Coupler



Wheel Bearing Grease

* Asterisk denotes tools that are not required for some applica-

tions. Thoroughly read instructions first to determine which tools

will be required for your application.

Parts

A

OE Rubber Bushing

B

Male Threaded (Axle) End

C

1” NF Jam Nut

D

Female Threaded (Chassis) End

E

9/16” SAE Flat Washer

F

Preload Washer

G

9/16” NF GR8 Ovalok Nut

H

Polyurethane Bushing

I

Snap Ring

J

9/16” x 4-1/2” GR8 Greaseable Bolt

K

Preload Washer

L

2.5” Johnny Joint Ball

M

Polyurethane Bushing

N

Tapered Split Cone

517-278-1226 • tech@jksmfg.com • www.jksmfg.com

491 W. Garfield Avenue, Coldwater, MI 49036

Advertising
This manual is related to the following products: