JKS OGS128 User Manual

Installation instructions, Welcome, Important

Advertising
background image

JKSOGS128

JKS Adjustable HD Trackbar Installation

Page 1

INSTALLATION

INSTRUCTIONS

Product: Adjustable Front HD Trackbar
Part Number: JKSOGS128

Applications: Jeep Wrangler TJ, 1997-06

Jeep Grand Cherokee ZJ, 1993-98

Jeep Cherokee XJ, 1984-01

Jeep Comanche MJ, 1986-92

Welcome

CONGRATULATIONS on purchasing a new Adjustable

HD Trackbar from JKS Manufacturing. We are committed

to providing you with the best products available and your

satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,

and save them for future reference, as they contain impor-

tant installation and maintenance information.

Important

NOT COMPATIBLE WITH right hand drive vehicles.
RE-TORQUE ALL FASTENERS after driving 150 miles.
CHECK TORQUE SPECIFICATIONS as part of normal

vehicle maintenance.

Tools Required



Metric/Standard Socket Wrench Set



Torque Wrench



Tie Rod End Remover *



Tape Measure



1-1/2” Open-End Wrench



5/8” Drill Bit



1/2” Drill Bit



Heavy Duty Ratchet Strap *



Anti-Seize Lubricant



Grease Gun with Zerk Fitting Coupler



Wheel Bearing Grease

* Asterisk denotes tools that are not required for some applica-

tions. Thoroughly read instructions first to determine which tools

will be required for your application.

Parts

Description

QTY

A

Female Threaded (Chassis) End

1

B

1-1/4” NF Jam Nut

1

C

Male Threaded (Axle) End

1

D

1/2” x 2-1/2" Grade 8 Bolt

1

E

Sleeve

1

F

Polyurethane Bushing Half

2

G

1/2" Flanged Locking Nut

1

H

5/8” x 4-1/2” Grade 8 Bolt

1

I

Preload Ring

1

J

Nylatron Bushing Half

2

K

Flex Joint Ball

1

L

Retaining Washer

1

M

5/8" Locking Nut

1

N

Grease Zerk

1

O

Set Screw

1

517-278-1226 • tech@jksmfg.com • www.jksmfg.com

491 W. Garfield Avenue, Coldwater, MI 49036

Advertising