ADC Gas Electric Steam WDA-540 - Manual (Page 32)

30
B. LEFT COIN COUNT
(No Cycle in Progress)
and/or
(Amount To Start)
(Dryer Temperature Display)
Press “HI Temp” key.
Display will read “LCC”
(left coin count).
Press “Perm Press” key
to display coin count.
Display will read
actual coin count.
I.E. 0126 = 126 units
or coins.
To retain or save existing
coin count press “Perm
Press.”
Display will read “rCC”
(right coin count). To exit
press “HI Temp.”
Display will read “0000”
for 1-second and then
dryer temperature display.
To cancel or delete
left coin count, press
“HI Temp” key.
Display will read
“CLCC” (cancel left
coin count).
Press “Perm Press”
key and display
will read “0000”
(coin count cancelled).
Press “Perm Press”
key and display
will read “rCC”
(right coin count).
FILL 25
70F
HI Temp
LCC
Perm Press
0126
HI Temp
CLCC
0000
Perm Press
Perm Press
rCC
HI Temp
70F
0000
(Close Program Switch)
Perm Press
To exit
program
mode open
program
switch
To review rCC
proceed to flow
chart C
To retain coin count To cancel coin count
To Exit