ADC Gas Electric Steam WDA-540 - Manual (Page 36)

34
or
Display will read light emitting diode
(L.E.D.) display status. Either no
flash (nFLS) or flash (FLS). If no
change, press “Perm Press” key,
otherwise press “HI” or “LO” keys
and then “Perm Press” keys.
If no flash is selected,
display will read “fixed
display” status. I.E. “AtSt”
amount to start dryer or
“Free Dry Mode” or
“FILL.” If no change,
press “Perm Press”
otherwise press “HI” or
“LO” keys and then press
“Perm Press” key.
Display will read coin
monitor status, “bCrS” bad
coin reset, or “bCLO” bad
coin lockout. If no change,
press “Perm Press” key,
otherwise press “HI” or “LO”
keys and then “Perm Press” key.
or
or
or
or
or
HI Temp
AtSt
LO Temp
AtSt
FILL
LO Temp
bCLO
bCrS
FILL
Perm Press
HI Temp
bCLO bCrS
HI Temp LO Temp LO Temp HI Temp
Perm Press
Continue
Perm Press
nFLS
nFLS FLS
FLS
HI Temp LO Temp HI Temp LO Temp
Continue