MagTek 99875125 - Manual (Page 109)

101
APPENDIX B. COMMAND LIST SUMMARY
This is a consolidated list of all available commands for the MagTek Windows Drivers.
Command Description Page
/cancel cmd Cancel a command. cmd can be any of the transaction
commands. 16
/display [x] Display a message or two alternating messages on the LCD
screen. 17
/echo string Driver test command. 17
/event n data Response to an unsolicited event notification. 18
/get prop Get a property. 18
/load_key n key Load a key into the device. 19
/rawrecv Receive data from the device 20
/rawsend x Send arbitrary data to the device. 21
/rawxact x Execute a send/receive transaction with the device in raw mode. 21
/read [[x] y] Read data from the device. 22
/reset Clear any pending operations and reset the device to initial state. 26
/set prop val Set a property. 26
/ver Read driver version. 26
/write data Encode magnetic stripe command. 27