MagTek 99875125 - Manual (Page 90)

MagTek Device Drivers for Windows
82
Installing MT-85:
Set “MT-85” to 1 under the “INSTALL” section. If you have selected to install the MT-85 driver then
change the device settings under the “MT-85” section.
Change the value of PortName, UsePort, baud, datasize, stopbits, and parity.
Example:
[MT-85]
DEVICE= MT-85
FriendlyName= MT-85
PortName=COM8:
UsePort=COM1:
baud=9600
datasize=7
stopbits=1
parity=EVEN
Installing MT-95:
Set “MT-95” to 1 under the “INSTALL” section. If you have selected to install the MT-95 driver then
change the device settings under the “MT-95” section.
Change the value of PortName, UsePort, baud, datasize, stopbits, and parity.
Example:
[MT-95]
DEVICE= MT-95
FriendlyName= MT-95
PortName=COM8:
UsePort=COM1:
baud=9600
datasize=7
stopbits=1
parity=EVEN