MagTek 99875125 - Manual (Page 80)

MagTek Device Drivers for Windows
72
After all of the settings have been verified, click OK. You can then use the Test button to confirm that the
device has been installed properly and is operating correctly. If the device is not connected, you can
bypass this step.
Completing the Installation
All the files have been copied and all of the settings have been confirmed. Click Finish.
Since some registry entries have been modified and some drivers may have to be installed, you will have to
reboot your computer to complete the installation process. Be sure to close all other applications before
restarting your computer. When you are ready, click Finish. If you want to restart your computer later, be
aware that the MTD drivers cannot be used until the computer is restarted.