MagTek 99875125 - Manual (Page 70)

MagTek Device Drivers for Windows
Installing USB HID Devices on Windows 2000 and XP
Note
Do not attach the USB HID Swipe reader until the MTD Disk image has
been created and the MTD Drivers have been installed. During installation
of the MTD Drivers, select Port-Powered Swipe Reader; it will be used to
communicate with the USB HID Swipe reader.
After the disk image has been created and the MTD Drivers have been installed, follow the steps below to
install the USB driver:
1. Navigate
to C:\DISK1\USB HID folder.
2.
Run SaveHID.BAT from that folder.
3.
Plug in the USB HID Swipe Reader.
4. Click Next.
62