MagTek 99875125 - Manual (Page 121)

Appendix D. Device Drive Summaries
113
MT-85 LOCO ENCODER
File Name MT85
Friendly Name(s) MT-85
Remarks The driver attempts to connect to the device by automatically
scanning all connection modes.
Commands Supported
/cancel cmd X /load_key n key /reset X
/display [x] /rawrecv X /set prop val X
/echo string X /rawsend x X /ver X
/event n data /rawxact x X /write data X
/get prop X /read [[x] y] X
Properties Supported
Property Yes Default Property Yes Default Property Yes Default
account_no chk_mod10 msg3
amount chk_number msg4
applied_fmt X chk_routing offline_enc
c_card_stat chk_status oper_tout
c_cardwpin 0 chk_transit pin_blk_fmt
c_check 0 cmd_pending X pinfilldig
c_events dblpinentry port_name X
c_keypress 0 dev_status X pwroffdelay
c_keystring 0 X s_down_tout dev_version
c_magnetic 1 enable_cmc7 track1ss X X
c_mechanics 0 track2ss enc_key X
c_pin 0 enc_key_sn track3ss X
c_smart 0 enc_mode trivpinchk
c_tracks X * entry_echo trk_enable X *
c_write X 2 entry_len trk1data X
c_wr_secure X 0 entry_tout trk2data X
capitalize X 1 events_on trk3data X
card_stat invalcmdrsp X 0 visa_mac1
chk_acount key_parity visa_mac2
chk_amount lasterr X visa_mac3
chk_bankid max_pin_len wr_coer X 1
chk_data msg1 wr_secure
chk_format msg2 xact_type
* = Depends on setting in the device.