MagTek 99875125 - Manual (Page 114)

MagTek Device Drivers for Windows
106
INTELLIPIN PINPAD & MSR
File Name IPIN
Friendly Name(s) IntelliPIN RS-232, IntelliPIN Wedge & IntelliPIN MICR+ Aux
Remarks The Automatic Settings in the properties sheet are not supported;
the communications must be specified manually. When using the
IntelliPIN on the MICR+ Aux port, the MICR+ driver must be
installed before the IntelliPIN driver; also the IntelliPIN driver
must be closed before the MICR+ driver is closed.
Commands Supported
/cancel cmd X /load_key n key X /reset X
/display [x] X /rawrecv X /set prop val X
/echo string X /rawsend x X /ver X
/event n data /rawxact x X /write data
/get prop X /read [[x] y] X
Properties Supported
Property Yes Default Property Yes Default Property Yes Default
account_no X chk_mod10 msg3 X
amount X chk_number msg4 X
applied_fmt X chk_routing offline_enc
c_card_stat chk_status oper_tout X *
c_cardwpin X 1 chk_transit pin_blk_fmt X *
c_check 0 cmd_pending X pinfilldig X *
c_events dblpinentry X * port_name X
c_keypress X 1 dev_status X pwroffdelay X *
c_keystring X 1 dev_version X * s_down_tout X *
c_magnetic X 1 enable_cmc7 track1ss X
c_mechanics 0 enc_key X track2ss X
c_pin X 1 enc_key_sn X * track3ss X
c_smart 0 enc_mode X * trivpinchk X *
c_tracks X 111 entry_echo X trk_enable X *
c_write 0 entry_len X trk1data X
c_wr_secure entry_tout X trk2data X
capitalize X 1 events_on trk3data X
card_stat invalcmdrsp X visa_mac1 X
chk_account key_parity X * visa_mac2 X
chk_amount lasterr X visa_mac3 X
chk_bankid max_pin_len X * wr_coer
chk_data msg1 X wr_secure
chk_format msg2 X xact_type X d
* = Depends on setting in the device.