MagTek 99875125 - Manual (Page 120)

MagTek Device Drivers for Windows
112
PORT-POWERED RS-232 INSERTION READER
File Name MTPPINSR
Friendly Name(s) Port-powered insert reader
Remarks
If events_on is enabled, the driver will send /event 1 M when the card is
inserted. It is suggested that events be disabled (/set events_on 0) before
the data is read to prevent the removal event from being included at the end of card
data. If a card has already been inserted when the driver is opened, there will not be
any notification when events_on is enabled. Consequently, it is recommended
that /get card_stat be issued immediately after opening the driver to see if a
card is blocking the sensor.
Commands Supported
/cancel cmd X /load_key n key /reset X
/display [x] /rawrecv X /set prop val X
/echo string X /rawsend x X /ver X
/event n data X /rawxact x X /write data
/get prop X /read [[x] y] X
Properties Supported
Property Yes Default Property Yes Default Property Yes Default
account_no chk_mod10 msg3
amount chk_number msg4
applied_fmt X chk_routing offline_enc
c_card_stat X 1 chk_status oper_tout
c_cardwpin chk_transit pin_blk_fmt
c_check 0 cmd_pending pinfilldig
c_events X 1 dblpinentry port_name X
c_keypress dev_status X pwroffdelay
c_keystring dev_version X s_down_tout
c_magnetic X 1 enable_cmc7 track1ss X
c_mechanics 0 enc_key track2ss X
c_pin enc_key_sn track3ss X
c_smart 0 enc_mode trivpinchk
c_tracks X 110 entry_echo trk_enable X 110
c_write 0 entry_len trk1data X
c_wr_secure entry_tout trk2data X
capitalize X 1 events_on X 0 trk3data X
card_stat X invalcmdrsp X 0 visa_mac1
chk_account key_parity visa_mac2
chk_amount lasterr X visa_mac3
chk_bankid max_pin_len wr_coer
chk_data msg1 wr_secure
chk_format msg2 xact_type
* = Depends on setting in the device.